400 watt Metal Halide Ballast Kits M155 480V

 

400 watt Metal Halide Ballast Kit M155 480V

 

400 watt Metal Halide Ballast Kit M155 480V

Manufacturer: James Lighting
Full ballast replacement kit w/ capacitor, core & mounting hardware
Ballast Type: MH Metal Halide
Full factory warranty 3 years!
Ballast 5-Tap Works on: 120V, 208V, 240V, 277V or 480V
Circuit Type: CWA
Lamp Wattage: Ballast 400 Probe Start
Dimensions:4.25″ x 4.75″ x 4.10″
ANSI Ballast Type: M135 / M155
Certifications: UL, cRU, RoHS
Capacitor:26uF – 400V – 100C.

A 400 watt Metal Halide Ballast 480V is an electrical device used to regulate the voltage and current supply to a 400 watt Metal Halide lamp operating at 480 volts.

We focuses not only on metal halide ballast. We design and manufacture lighting systems that are energy efficient, use less chemicals and have extended life.

James Lighting is constantly enhancing existing HID ballast offerings and developing new lighting solutions. our products are designed to have the highest quality of light, creating a safe and productive environment for those who use them.

metal halide Ballast Kit wiring diagram

 

A 400 watt Metal Halide Ballast 480V is an electrical device used to regulate the voltage and current supply to a 400 watt Metal Halide lamp operating at 480 volts.

High Intensity Discharge (HID) lamps require a ballast to apply starting voltage to the lamp and establish current flow – an arc – between the lamp electrodes.

Without a ballast, the arc will extinguish or draw increasing current until some circuit element burns up. Ballasts provide system stability by limiting the current that can be drawn.

Core and Coil metal halide HID ballasts are used in over 90% of all HID lighting. Replacement ballast kits contain the appropriate core and coil, a properly rated capacitor and all components required for ballast replacement.

James Lighting, core and coil, HID ballast kit is ideal for a wide variety of lighting applications, including factories, warehouses, gymnasiums and retail stores.

 

HID Ballast packing box

 

FAQ:

Can a 400w Metal Halide Ballast be used with a different wattage lamp?
A: No, a 400w Metal Halide Ballast is specifically designed to work with a 400 watt Metal Halide lamp and should not be used with a different wattage lamp.

Can a 400w Metal Halide Ballast be used with a 120V power supply?
A: No, a 400w Metal Halide Ballast is designed to be used with a 480V power supply and cannot be used with a 120V power supply.

What is the minimum starting temperature for a 400w Metal Halide Ballast?
A: The minimum starting temperature for a 400w Metal Halide Ballast is typically around -20°C (-4°F).

What is the maximum operating temperature for a 400w Metal Halide Ballast?
A: The maximum operating temperature for a 400w Metal Halide Ballast is typically around 70°C (158°F).

Can a 400w Metal Halide Ballast be used outdoors?
A: Yes, a 400w Metal Halide Ballast can be used outdoors as long as it is installed in a weatherproof enclosure.

What is the input voltage range for a 400w Metal Halide Ballast?
A: The input voltage range for a 400w Metal Halide Ballast is typically between 415-480V.

What is the typical power consumption of a 400w Metal Halide Ballast?
A: The typical power consumption of a 400w Metal Halide Ballast is around 450 watts.

Request A Quote

Related Products:

Get an instant quote from our most experienced consultants